From Zero to Stability: Hand in Hand Teaching You to Install Printer Rack

Specific installation steps：

• Use tools to open the machine’s packaging box, remove the protective foam and film from accessories after opening the box.
• Take out all accessories and check for any deformation or damage.
• Note: Carefully check and keep all accessories during unpacking.
• Install the machine legs on both sides and secure with screws.
• Fix the connecting plate between the left and right legs using screws.
• Install the corresponding accessories, install them on the left and right sides respectively, and fix them with screws.
•  Secure the rewinding and unwinding brackets with screws.
• Install and secure the waste ink tank bracket with screws.
• Install four casters and foot cups to the frame bottom and secure with screws.
• Install the rewinding shaft to the designated position and align the holes.
•  Install the left and right rewinding motors, align with the shaft, and secure with screws.
• Place the A-Film unwinding shaft into the unwinding assembly.
• Install the film-peeling motor brackets at the left and right unwinding tray positions and align the holes.
• Install the left and right unwinding trays at both ends of the shaft.
• Secure the shaft, motor brackets, and trays with screws.
• Remove protective film and transport screws from the device.
• Install the printer to the rack and connect the retractor connector.
• Install the rewinder connector. Install the laminating bracket. Install the ink tank bracket and connect the ink tubes.
• Connect the liquid level alarm and white ink stirrer cables.
• Connect the power cable. Install the waste ink tube.
• Remove the print head carriage lock.
• Install the laminating roller. Installation complete.