Powder Shaking Machine Touch Upgrade Guide: Complete Guide to Updating Touchscreen

✨Prepare a TF memory card(1-16G) and a card reader.

✨Insert the memory card into the USB port of the card reader connected to the computer, and perform the following steps to format the TF memory card.

✨Check which disk the inserted memory card is displayed in the computer, such as this disk showing “F”

✨Find “Run” in the start menu or press the keyboard “ win+R” to open the run window.Enter “cmd” and click OK to enter the DOS window.

✨ Type the instruction: format/q g:/fs: fat32/a:4096((Note:g is the disk number of TF card, and it is modified according to the corresponding disk number. Here this as an “F” disk, and change g to f. when the input is finished, click Enter. TF the memory card is formatted, and the window is closed.

✨Open the disk of TF memory card and copy the program file “DWIN_SET” to TF memory card. Remove the card reader and take out the TF card.

✨Unplog the power and signal plug of the touch screen. Insert TF card into the corresponding card slot of the touch screen. Connect the power plug back to the touch screen.

✨Touch screen automatically enters the download interface, waiting to see “ SEE Card Process.. end!” Indicates that the interface update is complete.

✨Unplug the power card within 2 seconds after writing, otherwise the writing will be repeated. After disconnecting the power cord, remove the TF card.

✨Plug back the signal line and power line, and the touch screen interface and program are updated.

✨Check the touch screen display and interface operation.