Flocking And Hot Stamping Solution

The specific steps are as follows:

• Firstly, cut the printed sample and place it on the fabric for heat pressing.
• Set temperature to 135℃ degrees, time to 30 seconds and pressure to 4kg.
• After pressing, wait for the fabric to cool down before peeling off the film.
•  If peeling is difficult, try reducing the pressure slightly.
• Next, cut a suitable size of flocking paper or gold silver foil and place it on the varnished area of the design.
• Use a piece of printing film to cover the edges of the foil to prevent unwanted gold borders.
• Remember: the shiny side of the foil should face outward and the flocking paper’s fuzzy side should face inward.
•  Now, perform the second hit press at the same 135℃，30 seconds, and 4kg pressure.
• Finally，remove the fabric and let it cool down before peeling off the film. And that’s it, your design is complete!